ER32 Collet Chucks

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy