End Mill Holders

CAT40 End Mill Holder 0.125 Inch X 1.38 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.125 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.125 Inch X 2 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.125 Inch X 2.37 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.125 Inch X 2.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.125 Inch X 3 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.125 Inch X 4 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.125 Inch X 4.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.125 Inch X 5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.125 Inch X 6 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.1875 Inch X 1.38 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.1875 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.1875 Inch X 2.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.1875 Inch X 3 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.1875 Inch X 4 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.1875 Inch X 4.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.1875 Inch X 4.72 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.1875 Inch X 6 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$79.67

CAT40 End Mill Holder 0.25 Inch X 1.38 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.25 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.25 Inch X 2.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.25 Inch X 3 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.25 Inch X 4 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.25 Inch X 4.72 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.25 Inch X 4.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.25 Inch X 6 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$79.67

CAT40 End Mill Holder 0.25 Inch X 9 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$117.71

CAT40 End Mill Holder 0.3125 Inch X 1.38 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.3125 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.3125 Inch X 2.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.3125 Inch X 3 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.3125 Inch X 4 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.3125 Inch X 4.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.3125 Inch X 4.72 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.3125 Inch X 6 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.3125 Inch X 9 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$117.71

CAT40 End Mill Holder 0.375 Inch X 1.38 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.375 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.375 Inch X 2.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.375 Inch X 3 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.375 Inch X 4 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.375 Inch X 4.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.375 Inch X 4.72 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.375 Inch X 5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.375 Inch X 6 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.375 Inch X 6.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$73.34

CAT40 End Mill Holder 0.375 Inch X 8 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$117.71

CAT40 End Mill Holder 0.375 Inch X 9 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$117.71

CAT40 End Mill Holder 0.437 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.437 Inch X 2.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.437 Inch X 2.62 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.437 Inch X 4 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.437 Inch X 4.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.437 Inch X 9 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$117.71

CAT40 End Mill Holder 0.5 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.5 Inch X 2.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.5 Inch X 2.62 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.5 Inch X 3 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.5 Inch X 4 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.5 Inch X 4.62 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.5 Inch X 5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.5 Inch X 6 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.5 Inch X 6.62 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.5 Inch X 8 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$117.71

CAT40 End Mill Holder 0.5 Inch X 9 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$117.71

CAT40 End Mill Holder 0.5625 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.5625 Inch X 2.62 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.625 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.625 Inch X 2.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.625 Inch X 3 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.625 Inch X 3.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.625 Inch X 4 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.625 Inch X 5.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.625 Inch X 5.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$76.96

CAT40 End Mill Holder 0.625 Inch X 6 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.625 Inch X 8 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$117.71

CAT40 End Mill Holder 0.625 Inch X 9 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$117.71

CAT40 End Mill Holder 0.75 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.81

CAT40 End Mill Holder 0.75 Inch X 3 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.75 Inch X 3.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.75 Inch X 3.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.75 Inch X 4 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$68.63

CAT40 End Mill Holder 0.75 Inch X 5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.75 Inch X 5.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.75 Inch X 5.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$76.96

CAT40 End Mill Holder 0.75 Inch X 6 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.75 Inch X 6.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$81.48

CAT40 End Mill Holder 0.75 Inch X 8 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$176.55

CAT40 End Mill Holder 0.75 Inch X 9 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$176.55

CAT40 End Mill Holder 0.875 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$103.22

CAT40 End Mill Holder 0.875 Inch X 3.5 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$103.22

CAT40 End Mill Holder 0.875 Inch X 3.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$102.94

CAT40 End Mill Holder 0.875 Inch X 4 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$102.94

CAT40 End Mill Holder 0.875 Inch X 6 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$110.01

CAT40 End Mill Holder 0.875 Inch X 9 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$176.55

CAT40 End Mill Holder 1.00 Inch X 1.75 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$103.22

CAT40 End Mill Holder 1.00 Inch X 2 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$102.94

CAT40 End Mill Holder 1.00 Inch X 3 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$102.94

CAT40 End Mill Holder 1.00 Inch X 4 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$102.94

CAT40 End Mill Holder 1.00 Inch X 6 Inch

Taper0to0Taper Runout < 0.0001” • AD+B coolant through the spindle & flange CAT40 Balanced G2.5 @ 30,000 RPM/ CAT40 Draw Bar Threads: 0.625”011 CAT50 Balanced G2.5 @25,000 RPM/ CAT50 Draw Bar Threads: 1”08 Hardened to 58062 HRC • Taper Shank ground to AT3 accuracy

$110.01

Loading...

Items have been added to cart.

One or more items could not be added to cart due to certain restrictions.

Added to cart

- Can't add this product to the cart now. Please try again later.

Quantity updated

- An error occurred. Please try again later.

Deleted from cart

- An error occurred. Please try again later.

JavaScript is disabled in your browser. Please enable JavaScript to continue.